If you have a corrupted or damaged USB flash drive that uses Alcor chip controller, such as Alcor FC8308, Alcor FC8508, or Alcor FC8406, you may be able to fix it using a software tool called FC MpTool. This tool can format and update the firmware of your USB flash drive, and restore it to its original state. In this article, we will show you how to download and use FC MpTool to repair your USB flash drive.
Step 1: Download FC MpTool
FC MpTool is a free software that can be downloaded from various online sources. However, some of these sources may contain malware or viruses, so you need to be careful when downloading the tool. One of the safe and reliable sources to download FC MpTool is from SoundCloud[^1^], where you can find a link to download the file FC MpTool FC8308 FC8508 FC8406 04.02.01.rar. This file contains the latest version of FC MpTool as of January 2023, and it supports repairing Alcor chip controllers AU6986, AU6990, AU6992, and AU6996.
Step 2: Extract and Run FC MpTool
After downloading the file FC MpTool FC8308 FC8508 FC8406 04.02.01.rar, you need to extract it using a software like WinRAR or 7-Zip. You will get a folder named FC_MpTool(04.02.01), which contains several files and subfolders. To run FC MpTool, you need to double-click on the file named FCMPTOOL.exe, which is located in the main folder.
Step 3: Connect Your USB Flash Drive
Before you connect your USB flash drive to your computer, make sure that you have backed up any important data on it, as the repair process will erase everything on it. Also, make sure that you have only one USB flash drive connected to your computer, as FC MpTool will detect and format all USB flash drives that are plugged in. Once you have connected your USB flash drive, you will see it appear in the main window of FC MpTool, under the Device column. You will also see information about its model name, capacity, firmware version, and status.
Step 4: Format and Update Your USB Flash Drive
To format and update your USB flash drive, you need to select it in the main window of FC MpTool, and then click on the Start button at the bottom right corner. This will initiate the repair process, which may take several minutes depending on the size and condition of your USB flash drive. You will see a progress bar and a message indicating the status of the repair process. When the repair process is completed, you will see a message saying \"Finish\" under the Result column.
Step 5: Verify Your USB Flash Drive
After the repair process is finished, you can disconnect your USB flash drive from your computer and reconnect it again. You should see that your USB flash drive is now working normally, and has been formatted to FAT32 file system. You can also check its properties to see if its capacity and firmware version have been updated correctly. If everything is fine, you can now use your USB flash drive as usual.
FC MpTool is a useful software tool that can help you repair your corrupted or damaged USB flash drive that uses Alcor chip controller. However, this tool may not work for all types of USB flash drives or all types of errors. If you encounter any problems or errors while using FC MpTool, you can try other methods or tools to fix your USB flash drive, such as using Windows Disk Management or Diskpart commands, or using other software tools like HP USB Disk Storage Format Tool or JetFlash Online Recovery Tool. You can also contact the manufacturer of your USB flash drive for further assistance or warranty service. 061ffe29dd